Case Studies

The below systems were installed by Solar Concepts using Suntech panels and either SMA or Xantrex inverters.

All Solar Concepts systems are installed with anodised aluminium racking, and stainless steel fixings, to provide a sturdy and corrosion resistant installation. Also, to ensure limited voltage loss, Solar DC cables are used from the solar panels to the inverter.

  • Woolooware, NSW

    #

    This 2.88kW grid connected solar generator was installed in Woolooware, NSW. This system was installed on a tiled roof facing north north west at a pitch of 26 degrees. It will generate approximately 4079kW/h per year and consists of 16 Suntech 180W Monocrystaline panels and a Xantrex GT2.8AU inverter.

  • Sylvania, NSW

    #

    This 2.16kW grid connected solar generator was installed in Sylvania, NSW. This system was installed on a garage tiled roof, facing north north east at a pitch of 25 degrees. It will generate approximately 2989kW/h per year and consists of 12 Suntech 180W Monocrystaline panels and a Xantrex GT2.8AU.

  • Broughton Vale, NSW South Coast

    #

    This 1.08kW grid connected solar generator was installed in Broughton Vale, on the NSW South Coast. This system was installed on a carport colorbond roof, facing north at a pitch of 29 degrees. It will produce approximately 1494kW/h per year and consists of six Suntech 180W Monocrystaline panels and a SMA SB1100 Sunnyboy inverter.

  • Sans Souci, NSW

    #

    This 2.88kW grid connected solar generator was installed in Sans Souci, NSW. This system is installed on a colorbond roof facing north north east at a pitch of 10deg. It will generate approximately 3994kW/h per year and consists of 16 Suntech 180W Monocrystaline panels and a Xantrex GT2.8AU inverter.